Pomex Tile Adhesive
Pomex Tile Adhesive – Reliable bond for floor and wall
Pomex powder and paste tile adhesives are engineered for tiles, ceramics, and stone in interior, facade, and pool areas.
Which Pomex tile adhesive fits your job?
For interior walls/floors, ready-to-use paste adhesive is fast. For facades, pools, and heavy-duty areas, choose the high-bond powder adhesive with moisture resistance. Prime concrete or old surfaces with Pomex concrete glue for maximum adhesion.
For underfloor heating, flexibility and thermal cycling matter; use powder adhesive with thermal resistance and elastomeric additives. Control bed thickness and use a proper notched trowel.
Key use cases
- Floor and wall tiling
- Pools and wet areas
- Facade and large slabs
- Underfloor heating substrates
Why Pomex tile adhesive?
- High adhesion on cement, concrete, and existing tiles
- Resistant to moisture, frost, and thermal cycles
- Non-slip formula with adequate open time for precise placement
- Compatible with underfloor heating and wet areas
Application tips
- Ensure a clean, sound surface; repair voids before tiling.
- Mix mechanically at low speed and rest 5 minutes for uniform paste.
- Choose a notched trowel that matches tile size.
- For pools/facades, honor expansion joints and waterproof the substrate.
Tile adhesive FAQs
What is the water ratio for powder adhesive?
Check the package; typically 5.5–7 liters of water per 20 kg bag depending on product grade.
Which product is best for pools?
Use the high-bond powder tile adhesive on mineral substrates; primer or Pomex concrete glue may be added if needed.
When can I grout?
Around 24 hours after installation in normal temperature; allow more time in low temperature or high humidity.