Waterproof concrete glue P60 PomexLux
CONCRET ADHESIVE P60 is a thick polymer liquid with an emulsion state. It is used to increase the adhesion of new concrete or mortar to old concrete or mortar. In addition to increasing the adhesion power, P60 Pomex concrete adhesive reduces the permeability of concrete or mortar. P60 Pomex REPAIR CONCRETE P60 concrete adhesive complies with ASTM C 1059, C 1042, C 1440 standards. This material can be dissolved in water before drying and will not dissolve in water at all after drying. Therefore, while facilitating the use due to easy mixing with cement mixtures, it will lead to maintaining quality properties equal to the useful life of the structure. P60 Pomex Lux concrete adhesive, while increasing the adhesion of new concrete or mortar to concrete or old mortar, prevents cracking or tumbling and causes Permeability decreases. Stability of quality in alkaline environments and reduction of shrinkage with the possibility of reducing the ratio of water consumption are also among other advantages of P60 material.
Uses of P60 PomexLux waterproof concrete adhesive
P60 concrete glue can be used to repair surfaces and make mortar more sticky.
• Preparation of mortars and linings for sealing water sources and swimming pools and sewage plans, treatment plants, concrete surfaces of walls and floors of various factories and warehouses and parking lots, and substructure for flooring, repair and reconstruction of porous concrete in the foundation. The foundations of bridges
• Old damaged concrete
• Adhesive agent in cosmetic putty powder for smoothing exposed concrete surfaces and underlaying epoxy paints
• Acrylic, polyurethane
• POMEXLUX powder ceramic adhesive reinforcement
• Reinforcement of strapping mortar
• Preparation of adhesive mortar for general repair of concrete surfaces instead of using metal nets
Advantages of concrete adhesive P60
• Increasing the adhesion strength of mortar to old concrete without using metal nets
• Reduction of cracks due to non-shrinkage
• Suitable for sealing drinking water sources and swimming pools
• Increasing tensile and bending strength and abrasion resistance
• High resistance to deicing salts
• High flexibility
The consumption of waterproof concrete glue P60 PomexLux
For cement mortar, about 800 grams of P60 is used per square meter with a thickness of one centimeter.
300 grams of P60 is used for each square meter with a thickness of 3 mm.
How to use concrete glue P60
In order to use P60 concrete glue, the area to be used must first be cleaned of grease, particles and dust, surface decay. Surfaces should be covered from the sun in hot weather with a tent. Deep and surface cracks should be opened with special tools so that the mortar can easily penetrate into the cracks. Concrete glue is dissolved with water and after dilution it is mixed with cement and sand, which results in a paste-like and smooth mortar. The suitable percentage of mixing is 5 to 20% of the weight of cement used. Apply a layer of glue on the concrete before using the mortar. Add the concrete glue mixed with diluted water to the dry parts of the concrete. The smaller the thickness or the greater the pressure on it, the higher the consumption of concrete adhesive. It is necessary to apply a layer of concrete adhesive solution to the surface before work. In high thicknesses, it is more suitable to use P60 concrete adhesive in layers. be
Mixing ratio for making ADHESIVE CONCRETE P60 POMEXLUX primer
It is better to mix P60 concrete glue with three times the volume of water in order to make an underlaying primer. Primer should be used on concrete surfaces with a brush before applying concrete.
Mixing ratio for repair lining and general coating REPAIR CONCRETE P60
For the preparation of local repair mortar and the implementation of general coating, the mixing ratio of concrete glue with water is 1:2. This solution is for use in dry mortar with a combination of zero to 2.5 mm sand, 15 kg + cement 5 kg + fibers 10 grams, instead of It is water. After one hour, this mortar reaches its initial adhesion, therefore it is recommended to prepare the mortar for one hour. The prepared mortar can be used as a lining for concrete and brick surfaces with a thickness of 15 mm. Apply the mortar 4 hours after the first layer.
Mixing ratio of softening and local mortar
The mixing ratio of P60 concrete adhesive with water is 1 to 2. This solution is suitable for use in smoothing lining with a combination of siliceous stone + cement in a ratio of 3 to 1. This mortar is suitable for a maximum thickness of 3 mm, for later thicknesses. Repair after 24 hours of the first coating. You can apply this coating on the surface of the lining after the primer with metal trowels. The lining mortar and the top layer can be used alone for sealing. For sealing water and sewage sources. Without using acrylic mesh, the above-mentioned primer, primer, and softening mortar are used respectively. After applying the coating, the surface is kept away from the humid sun for 5 days, and after 10 days, the surface is suitable for sealing.
Mixing ratio to repair exposed concrete and prepare surfaces for painting
For times when the destruction is high or the damaged surfaces are deep, a layer of lining mortar and smoothing coating is used on it.
Mixing ratio for stone installation
To prepare stone installation mortar, water, sand, and cement are used in an equal amount + 30% P60 for installation on the floor. This mortar with a thickness of 2 mm is used in one kilogram per square meter.
we suggest:
To strengthen ceramic glue, use 1/2 P60 glue + water.
P60 is used with a combination of 30 to 50% + water + soft stone powder and white cement to fill travertine stone porosity.
Technical specifications of concrete glue P60
• Packaging: 8 kg buckets
• Type: Liquid
• Specific weight: 1.12 kg
• Appearance: milky
• PH 5
Adhesion of concrete surface and modified mortar 0.20KG/CM2
• Adhesion of concrete to old concrete 30KG/CM
• Conditions and duration of storage
No comment